Toggle Clamps

Vertical Hold Down Action : (VTC- Series)
As the name implies clamps of this type hold the work piece with a downward clamping action. These clamps are manufactured with a holding capacity up to 3000 kgs. The clamping exhibits a minimum of 90° opening angle giving full clearance forloading & unloading of workpiece. Clamping arm can be solid bar, U shaped or fixed holeto suit individual requirements.

Horizontal Hold Down Action : (H-Series)
The holding action in these types of Toggle Clamps is same as VTC-Series clamp.The outstanding characteristic is the low height design. Unlike the handle & theclamping bar of the VTC-Series, these of the H-Series clamps move in oppositedirection. The holding capacities range upto 1,000 kgs. The clamping arm canbe solid bar, U shaped or fixed hole type.

Straight Line Action : (HTC-Series)
The straight line action toggle clamps design uses a straight-line or push/pull, Toggle clamping action. The push/pull handle is easy to operate & moves the plungers of the clamp in and out along its axis. Most of these clamps can be locked in two positions, allowing you to use them as either push or pull clamps. These clamps are manufactured in a variety of models to accommodate a wide range of load ratings(45 kgs - 4,500 kgs).

Pull Action Clamps : (PAH-Series)
Steel-Smith's Pull Action Clamps are designed for sealing chambers, doors, mould closuresor other such applications requiring closure mechanisms. The handle can be moved to placethe clamping U - Bolt Bar hook around the opposing latch & pull down to reach the lockposition. The threaded "hook" or "U-bolt” type bar offer an adjustment feature. The clampscan withstand pressures from 150 kgs. to 3000 kgs.

Pull Action Clamps : (PAH-Series)
Steel-Smith's Pull Action Clamps are designed for sealing chambers, doors, mould closuresor other such applications requiring closure mechanisms. The handle can be moved to placethe clamping U - Bolt Bar hook around the opposing latch & pull down to reach the lockposition. The threaded "hook" or "U-bolt” type bar offer an adjustment feature. The clampscan withstand pressures from 150 kgs. to 3000 kgs.

Pull Action Clamps : (PAH-Series)
Steel-Smith's Pull Action Clamps are designed for sealing chambers, doors, mould closuresor other such applications requiring closure mechanisms. The handle can be moved to placethe clamping U - Bolt Bar hook around the opposing latch & pull down to reach the lockposition. The threaded "hook" or "U-bolt” type bar offer an adjustment feature. The clampscan withstand pressures from 150 kgs. to 3000 kgs.

Steel-Smith Pneumatic Toggle Clamps combine the unfaltering Steel-smith toggle action with the speed and efficiency of pneumatic actuators.
These clamps yield high-speed operations with secure and finely controlled clamping pressures. Any number of these clamps can be operated instantly at the touch of a switch and where required they can be arranged to operate in any desired clamping sequence. Pneumatic Toggle Clamps are available in a variety of actions and models to meet thevarious clamping requirements.

Steel-Smith introduces its latest range of clamps with Mechanism, this mechanism Additional Locking ensures that the clamp remains locked in any condition. 

In order to unclamp, the mechanism must be first released. In the Vertical Series this mechanism will hold the clamping arm in both the closed and open positions, so that it is protected against unintentional opening or closing through vibration or if the clamp is mounted overhead.

Latch Clamps :
Latch type toggle clamps also called latch hook toggle clamp or pull-action latch clamps. These latch type clamps operate on a horizontal plane, get two pull sides together, or at 90º.

Steel-Smith Pneumatic Toggle Clamps combine the unfaltering Steel-smith toggle action with the speed and efficiency of pneumatic actuators.

These clamps yield high-speed operations with secure and finely controlled clamping pressures. Any number of these clamps can be operated instantly at the touch of a switch and where required they can be arranged to operate in any desired clamping sequence.

Pneumatic Toggle Clamps are available in a variety of actions and models to meet thevarious clamping requirements.

Steel-Smith introduces India's biggest range of Swing Clamps having clamping capacity range from 20 kgs. to 1600 kgs. The unique single cylinder design powers both the swing & force cycles eliminating the bulkier, two-cylinder concept that requires one cylinder for the swing motion and another cylinder for the force cycles. Gives you more force in less space with less parts. Loading and unloading of the job is very easy due to the swing action.

Horizontal Hold Down Action : (H-Series)
The holding action in these types of Toggle Clamps is same as VTC-Series clamp.The outstanding characteristic is the low height design. Unlike the handle & theclamping bar of the VTC-Series, these of the H-Series clamps move in oppositedirection. The holding capacities range upto 1,000 kgs. The clamping arm canbe solid bar, U shaped or fixed hole type.

Straight Line Action : (HTC-Series)
The straight line action toggle clamps design uses a straight-line or push/pull, Toggleclamping action. The push/pull handle is easy to operate & moves the plungers of theclamp in and out along its axis. Most of these clamps can be locked in two positions,allowing you to use them as either push or pull clamps. These clamps are manufacturedin a variety of models to accommodate a wide range of load ratings.(45 kgs - 4,500 kgs)