Swivel Feet,Leveling Feet

• Swivel pads are of modular design. The components can be individually combined to match the application. The swivel pads are applicable for use on machines, installations and even office furniture.

• Swivel pads consist of two components - a plate and a threaded spindle or ball joint. Any plate can be combined with any threaded spindle or ball joint.

• Using a plastic hammer, knock the ball of the threaded spindle or ball joint vertically into the swivel pad plate. If necessary, the two fastening holes (closed) in the swivel pad plate can be opened by simply punching them out to allow the swivel pad to be fastened to a base.

• Swivel pads always have a minimum height of H = 22.5 mm independently of the plate or threaded spindle or ball joint size (see figure 2). When assembling with threaded spindle, the height of the complete swivel pad is calculated by adding 22.5 mm to the length of the threaded spindle, and the height of the hexagon. (Total height swivel pad = L L1 22.5 mm).

Steel-Smith was established in the year 1970 and India’s largest manufacturer of Toggle Clamps, Clamps, Pneumatic Toggle Clamps, Fixture Elements, Clamping Devices, Hydraulic Swing Clamps and Jigs and Fixture elements. This website contains over 400 products & Steel-Smith has developed these clamps for infinite applications, considering the different shapes and sizes, holding capacity as well as operating ease.

• Swivel pads are of modular design. The components can be individually combined to match the application. The swivel pads are applicable for use on machines, installations and even office furniture.

• Swivel pads consist of two components - a plate and a threaded spindle or ball joint. Any plate can be combined with any threaded spindle or ball joint.

• Using a plastic hammer, knock the ball of the threaded spindle or ball joint vertically into the swivel pad plate. If necessary, the two fastening holes (closed) in the swivel pad plate can be opened by simply punching them out to allow the swivel pad to be fastened to a base.

• Swivel pads always have a minimum height of H = 22.5 mm independently of the plate or threaded spindle or ball joint size (see figure 2). When assembling with threaded spindle, the height of the complete swivel pad is calculated by adding 22.5 mm to the length of the threaded spindle, and the height of the hexagon. (Total height swivel pad = L L1 22.5 mm).

• Swivel pads are of modular design. The components can be individually combined to match the application. The swivel pads are applicable for use on machines, installations and even office furniture.

• Swivel pads consist of two components - a plate and a threaded spindle or ball joint. Any plate can be combined with any threaded spindle or ball joint.

• Using a plastic hammer, knock the ball of the threaded spindle or ball joint vertically into the swivel pad plate. If necessary, the two fastening holes (closed) in the swivel pad plate can be opened by simply punching them out to allow the swivel pad to be fastened to a base.

• Swivel pads always have a minimum height of H = 22.5 mm independently of the plate or threaded spindle or ball joint size (see figure 2). When assembling with threaded spindle, the height of the complete swivel pad is calculated by adding 22.5 mm to the length of the threaded spindle, and the height of the hexagon. (Total height swivel pad = L L1 22.5 mm).