Automotive Clamps

The H.V. Series Toggle Clamps comprise of a basic toggle mechanism onto which can be welded at a desired angle, the clamping arm and handle which are supplied with the clamp. These models feature a swivel base which is welded at the desired angle to the mechanism, then welded either directly to the fixture or alternatively to a base which is offered as an accessory for bolt mounting. The clamping arm exhibits 180 degree opening angle which enables easy unloading of workpiece. Accurately machined steel components are equipped with hardened bushes & pivot pins. Three sizes basic linkages are available which allows the designer complete flexibility to position the base, clamp arm handle and weld them to suit the application.

These clamps have a unique design that offers the designer both complete design flexibility & clamping force. These clamps comprise of a very strong & rugged toggle mechanism. The clamping arm & handle which are provided with the clamp can be welded at the desired angle to suit the individual requirements of work pieces. All components are of first grade steel & the axles are hardened running in either hardened bushes or directly in close tolerance holes. The clamps are finished olive green passivation.

The Base Straight Series is identical to the Swivel Base Series with the exception of the base design. For situations where a vertical surface is used to mount the clamp a straight base can be used. The B.S. series clamps have more height under the clamping bar in the closed position. The clamp opens a full 180 to completely clear the work area. The handle and the clamping arm supplied with the clamp can be welded at a desired angle. Similar to the Swivel Base Series clamps the bushes and pivot pins are hardened for higher efficiency of the clamp. The clamps are available in five sizes.